Our epoxy resin pressure gel molding machine is used for manufactures circular cores,PT cores,voltage regulator,through which you are guraanteed with high performance and high value addition.
Our winding machine adopets the most advanced technology and world famous brand.it can accurate count length of loading,turns of winding,wire spaceing by PLC programmable.So far we have different kinds of epoxy resin pressure gel molding machine,such as toroidal winding machine,winding machine for PT cores(enclosed cores), first winding and secondary winding.
The epoxy resin pressure gel molding machine hydraulic drive system
The main devices are 25MYCY14-1B classification variable axial plunger pump,DH1-0713-X24D and DHI-0630 / 2-X24DC electromagnetic reversing valve the DLOH-3A electromagnetic valve ,HR-021-2 liquid control one-way valve ,Y-Fc6D-P / O overflow valve ,NXQ accumulator ,2LA-F6D-ABU the one-way throttle valve .Hydraulic system consists of 7 brands.
Epoxy resin pressure gel molding machine control as below: the left and the right mould mechanism, the right and left core pulling mechanism, the right and left core pulling mechanism, the tilt mechanism.
Epoxy resin pressure gel molding machine Application:
It is mainly used for making epoxy resins products such as transformers,12KV-1250A,3150A insulation cylinder,spout,bushings,wall bushings,bending plate,SF6 insulating cover,Bushing SF6 ect.
Epoxy resin pressure gel molding machine operating guide:
1.Installing and heating molds on mold plates, lock mold, heating molds up to 60°c,open molds,brush mold release agent, close molds, until temperature up to 145-150°c.
2.Pre-mixing casting compound (resin,curing agent,color paste and silica power), vacuumiz when mixing,on the mxing pot, turn on air release valve when the vacuum gage show –0.1.
3.Injection ready compound into molds, push mixing pot nearby the machine, connect pipe from mixing pot to mold, pressure compound into mold until full injection.
4.Curing, release air before open mold, move the ready products into oven start to curing.